Universal Journal of Materials Science  

Universal Journal of Materials Science is an international peer-reviewed journal that publishes original and high-quality research papers in all areas of materials science. As an important academic exchange platform, scientists and researchers can know the most up-to-date academic trends and seek valuable primary sources for reference.

ISSN: 2331-6691 (Print)

ISSN: 2331-6705 (Online)

Contact Us: ujms.editor@hrpub.org or editor@hrpub.org

Website: https://www.hrpub.org/journals/jour_info.php?id=62


Dr. Sepehr Vasheghani Farahani
Department of Physics, University of Warwick, UK

Dr. Sanjeeva Witharana
Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, University of Ruhuna, Sri Lanka

Prof. S. S. Sharma
Department of Mechanical & Manufacturing Engineering, Manipal University, India

Prof. Oh Joo Tien
School of Materials Science & Engineering, College of Engineering, Nanyang Technological University, Singapore

Prof. Mohamed Morsy
Department of Chemistry, King Fahd University of Petroleum & Minerals, Saudi Arabia

Dr. Mevlüt Gürbüz
Department of Mechanical Engineering, Faculty of Engineering, Ondokuz Mayis University, Turkey

Prof. Mamun Al Rashed
Department of Materials and Metallurgical Engineering, Bangladesh University of Engineering and Technology, Bangladesh

Prof. Ling Bing Kong
School of Materials Science & Engineering, College of Engineering, Nanyang Technological University, Singapore

Dr. Khurram Munir
Department of Mechanical and Product Design Engineering, School of Engineering, Swinburne University of Technology, Australia

Dr. James Wang
Faculty of Science, Engineering and Technology, Industrial Research Institute Swinburne, Swinburne University of Technology, Australia

Dr. Epifania Bono
Zurich University of Applied Sciences, Switzerland

Dr. Elnaz Hajizadeh
Department of Chemical Engineering, University of Michigan, Australia

Dr. Ahmed Arabi Hassen
Oak Ridge National Laboratory (ORNL), TN, USA

Dr. Hrushikesh Abhyankar
School of Aerospace, Transport and Manufacturing, Cranfield University, UK

Dr. M. Mahbubur  Rahman
School of Engineering & Information Technology, Murdoch University, Australia

Prof. Mokhotjwa Simon Dhlamini 
Department of Physics, College of Science, Engineering and Technology, University of South Africa, South Africa

Dr. Robert Olejnik 
Polymer Centre, Faculty of Technology, Tomas Bata University in Zlin, The Czech Republic

Dr. Yunfa Zhang 
Institute for Aerospace Research, National Research Council Canada, Canada

Prof. Di Fabrizio Enzo 
Physical Sciences and Engineering Division, King Abdullah University of Science and Technology, Saudi Arabia

Dr. Miroslaw Bonek 
Institute of Engineering Materials and Biomaterials, Poland

Prof. Katsuyoshi Kondoh 
Department of Composite Materials Processing, Joining and Welding Institute (JWRI), Osaka University, Japan

Dr. Hideki Nabika 
Department of Material and Biological Chemistry, Faculty of Science, Yamagata University, Japan

Dr. Karel Gryc 
Department of Metallurgy and Foundry, Faculty of Metallurgy and Materials Engineering, Technical University of Ostrava, The Czech Republic

Prof. Pier Luigi Luisi 
Department of Biology, Roma Tre University, Italy

Dr. Marcelo E. Domine 
Institute of Chemical Technology, Polytechnic University of Valencia, Spain

Dr. Pinghai Shao 
National Research Council Canada, Canada

Dr. Sáawomir Wierzbicki 
Faculty of Technical Sciences, University of Warmia and Mazury in Olsztyn, Poland

Dr. Ying-Pin Huang 
ITRI Southern Region Campus, Industrial Technology Research Institute, Taiwan

Prof. Terrence Perera 
Materials Science and Engineering Research Institute, Sheffield Hallam University, UK

Dr. Shin-ichi Yusa 
Department of Materials Science and Chemistry, Graduate School of Engineering, University of Hyogo, Japan

Dr. Ricardo Del Valle-Zermeño 
Department of Materials Science and Metallurgy, University of Barcelona, Spain

Dr. Malgorzata Wojtoniszak 
Institute of Chemical and Environment Engineering, West Pomeranian University of Technology, Poland

Dr. Silvia Scaglione 
Institute of Electronics, Computer and Telecommunication Engineering (IEIIT), the Italian National Research Council (CNR), Italy

Dr. Vladimir Pankov 
Coatings and Metallic Products Group, Structures, Materials, and Manufacturing Laboratory, National Research Council Canada - Aerospace Portfolio, Canada

Prof. Duc Nguyen-Manh 
Department of Theory and Modelling, Culham Centre for Fusion Energy, United Kingdom Atomic Energy Authority, UK

Dr. Jianying Ouyang 
National Research Council Canada, Canada

Dr. Maarten de Jong 
Department of Materials Science and Engineering, University of California, USA

Dr. Suwas Nikumb 
National Research Council of Canada, Canada

Dr. Sascha Steckbeck 
University of Bremen, Germany

Dr. Pokorny Z. 
Department of Mechanical Engineering, University of Defence in Brno, The Czech Republic

Dr. Julien Barthes 
University of Strasbourg, France

Dr. Biprodas Dutta 
Materials Science & Engineering Program and Nanotechnology Center, the Catholic University of America, USA

Prof. Giuseppe Pintaude 
Academic Department of Mechanics, Federal University of Technology - Paraná, Brazil

Dr. Franco Battaglia 
Department of Materials Engineering and Environment, University of Modena, Italy

Prof. K. G. Anthymidis 
Department of Materials, Applied Research Center of Serres, Greece

Dr. Artemis Stamboulis 
School of Metallurgy and Materials, University of Birmingham, UK

Dr. Ikbel Haded 
Photovoltaics Laboratory, Center for Research and Energy Technologies, Tunisia

Dr. Mohammed Shahien 
National Institute of Advanced Industrial Science and Technology (AIST), Japan

Dr. Nguyen Anh Tuan 
International Training Institute for Materials Science, Hanoi University of Science and Technology (HUST), Vietnam

Prof. Feng Fang 
School of Material Science and Engineering, Southeast University, China

Dr. Ming-Zhe Bian 
Department of Materials Engineering, Faculty of Engineering, Monash University, Australia

Dr. Yves Grincourt 
National Research Council Canada, Canada

Dr. Xueyong Pang 
Interdisciplinary Centre for Advanced Materials Simulation (ICAMS), Ruhr University Bochum, Germany

Dr. Alain Portavoce 
1)Faculty of Science and Technology, Institute for Materials, Microelectronics and Nanosciences of Provence, France; 2)The French National Center for Scientific Research, France

Dr. Xiaodong Jia 
Faculty of Engineering, Institute of Particle Science and Engineering, School of Chemical and Process Engineering, University of Leeds, UK

Dr. Panagiota Tsotra 
Institute of Polymer Engineering, School of Engineering, University of Applied Sciences Northwestern Switzerland, Switzerland

Prof. Marcello Romagnoli 
Department of Engineering "Enzo Ferrari", University of Modena and Reggio Emilia, Italy

Dr. Elena Plis 
Skinfrared LLC, USA

Dr. Artur Chrobak 
Institute of Physics, University of Silesia, Poland

Prof. Huey-Jiuan Lin 
Department of Materials Science and Engineering, National United University, Taiwan

Dr. Stefan Linn 
Institute of Materials Science, Technical University of Darmstadt, Germany

Dr. Hongbo Li 
Industrial Materials Institute, National Research Council Canada, Canada

Dr. Dongfang Yang 
National Research Council Canada, Canada

Dr. Virgilio Correcher Delgado 
Research Centre for Energy, Environment and Technology (CIEMAT), Spain

Dr. Dániel Koncz-Horváth 
Institute of Physical Metallurgy, Metalforming and Nanotechnology, University of Miskolc, Hungary

Dr. Francisco Javier Valdivia Valero 
University of Burgundy, France

Dr. Naiying Du 
National Research Council, Canada

Dr. Alfonso García 
Sensors and Actuators Group, Department of Building Technology, Polytechnic University of Madrid, Spain

Dr. Yubo Jiao 
Department of Chemical and Environmental Engineering, University of Arizona, USA

Prof. Roman Morgunov 
Institute of Problems of Chemical Physics, Russian Academy of Sciences, Russia

Dr. Belov Petr Anatolevich 
Bauman Moscow State University, Engineering center - New Materials, Composites and Nanotechnologies, Russia

Prof. Charles C. Sorrell 
University of New South Wales, Australia

Dr. Anna J. Dolata 
Faculty of Materials Engineering and Metallurgy, Silesian University of Technology, Poland

Dr. Gregory M. Marshall 
Energy, Mining and Environment Portfolio, National Research Council Canada, Canada

Dr. James Chen 
CANMET Materials Technology Laboratory Minerals and Metals Sector, Natural Resources Canada, Canada

Dr. Chien-hong Lin 
Department of Mechanical Engineering, Johns Hopkins University, USA

Dr. Gaurav Argade 
KnightHawk Engineering Inc., USA

Prof. Ladisla, Vrsalovic 
Department of Electrochemistry and Materials Protection, Faculty of Chemistry and Technology, Croatia

Dr. Ramya Kottadi 
P.G. Department of Physics, Women's Christian College (WCC), Chennai, India

Dr. Balaga Viswanadham 
Head Department of Chemistry, RGUKT-IIIT, Srikakulam, Andhra Pradesh, India

Dr. Mahmut Kayar 
Department of Textile Engineering, Faculty of Technology, Marmara University, Turkey

Dr. Maciej Fronczak 
Lodz University of Technology, Poland

Dr. Guzide Meltem Lule Senoz 
Department of Metallurgical and Materials Engineering, Ataturk University, Turkey

Assoc. Prof. Maria Plamenova Nikolova 
Department of Material Science and Technology, Faculty of Mechanical and Manufacturing Engineering, University of Ruse Angel Kanchev, Bulgaria

Assoc. Prof. Hab. Marcin Nabiałek 
Department of Functional Materials, Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Poland

Assoc. Prof. Rahima S. Mammadova 
Azerbaijan State Pedagogical University, Azerbaijan

Dr. Chinh Trinh Dung 
Institute for Nanotechnology, Vietnam National University, Vietnam

Dr. Md. Wasi Ahmad 
Department of Chemical Engineering, College of Engineering, Dhofar University, Oman

Dr. Santosh Shamarao Patil 
Department of Chemistry, Pohang University of Science and Technology (POSTECH), South Korea

Dr. Siddhartha Brahma 
Department of Material Science and Engineering, University of Alabama at Birmingham, USA

Dr. Alireza Valanezhad 
Department of Dental and Biomedical Materials Science, Graduate School of Biomedical Science, Nagasaki University, Japan

Dr. Natalia Vladimirovna Kamanina 
Vavilov State Optical Institute, Russia

Dr. Hector G. Riveros Rotge 
Faculty of Sciences, National Autonomous University of Mexico, Mexico

Dr. Siti Amira Binti Othman 
Faculty of Applied Science and Technology, Tun Hussein Onn University of Malaysia, Malaysia

Dr. Viktor Savov 
Department of Mechanical Wood Technology, Faculty of Forest Industry, University of Forestry, Bulgaria

Dr. Fabrice Dagrain 
Stone Assistance Sprl, Belgium

Dr. Ravishankar Ganpatrao Kadam 
Laboratory of Nano Catalysis, Czech Advanced Technology and Research Institute (CATRIN), The Czech Republic

Dr. Jariyavadee Sirichantra 
Department of Science Service, Ministry of Higher Education, Science, Research and Innovation, Thailand

Dr. Mohd Salahuddin Mohd Basri 
Department of Process and Food Engineering, Faculty of Engineering, Universiti Putra Malaysia, Malaysia

Assoc. Prof. Bilyana Kostova 
Department of Nature Sciences, New Bulgarian University, Bulgaria

Prof. Shaaban Mohamed Mahmoud Abdelaal 
Department of Restoration, Faculty of Archeology, Fayoum University, Egypt

Dr. Hicham Es-soufi 
Department of Materials and Processes, Moulay Ismail University, Morocco

Dr. Tanja Vojvoda Zeljko 
Division of Materials Chemistry, Ruđer Bošković Institute, Croatia

Dr. Tamara N. Patrusheva 
Department of Ecology, Baltic State Technical University, Russia

Dr. Shikha Awasthi 
Department of Chemistry, Manipal University Jaipur, India

Dr. Radhia Msaadi 
Department of Chemistry, Faculty of Science of Gabes, University of Gabes, Tunisia

Assoc. Prof. Amine Haj Taieb 
Higher Institute of Art and Craft in Sfax, University of Sfax, Tunisia

Dr. Monica Raduly 
The National Institute for Research & Development in Chemistry and Petrochemistry (ICECHIM), Romania