Journals Information
- Aims & Scope
- Indexing
- Editorial Board
- Reviewers
- Guidelines
- Submit Manuscript
- Archive
- Article Processing Charges
- Call for Papers
- Publication Ethics and Malpractice Statement
- Copyright
- FAQs
Special Issues Information
Universal Journal of Mechanical Engineering 
Universal Journal of Mechanical Engineering is an international peer-reviewed journal that publishes original and high-quality research papers in all areas of mechanical engineering. As an important academic exchange platform, scientists and researchers can know the most up-to-date academic trends and seek valuable primary sources for reference.
ISSN: 2332-3353 (Print)
ISSN: 2332-3361 (Online)
Contact Us: ujme.editor@hrpub.org or editor@hrpub.org
Website: https://www.hrpub.org/journals/jour_info.php?id=51
Reviewers
Dr. Qijun Zheng
Laboratory for Simulation and Modeling of Particulate System (SIMPAS), University of New South Wales, Australia
Prof. J. Srinivas
Department of Mechanical Engineering, National Institute of Technology, India
Prof. Duong Hai Minh
Department of Mechanical Engineering, National University of Singapore, Singapore
Dr. Cătălin Cruceanu
Department of Railway Vehicles, Faculty of Transport, University Politehnica of Bucharest, Romania
Dr. Helena Victorovna Guitiss Navas
Department of Mechanical and Industrial Engineering, Faculty of Science and Technology, New University of Lisbon (UNL), Portugal
Dr. Reza Oskouei
School of Computer Science, Engineering and Mathematics, Flinders University, Australia
Prof. Pedro Javier Gamez-Montero
Department of Fluid Mechanics (MF), Polytechnic University of Catalonia, Spain
Dr. Basdeo Lal
School of Mechanical Engineering, College of Engineering, Science and Technology, Fiji National University Nasinu, Fiji
Prof. Nicolae D. Cristescu
Department of Mechanical and Aerospace Engineering, University of Florida, USA
Dr. Lawrence D. Sobel
Department of Aerospace and Mechanical Engineering, University of Arizona, USA
Prof. Miran Ulbin
Faculty of Mechanical Engineering, University of Maribor, Slovenia
Dr. Turgut Gülmez
Faculty of Mechanical Engineering, International Telecommunication Union, Turkey
Dr. Levent Malgaca
Department of Mechanical Engineering, Dokuz Eylül University, Turkey
Dr. Fernando Garcia Gonzalez
Department of Applied Physics, Polytechnic University of Catalonia, Spain
Dr. Damjan Klobcar
Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
Dr. Ludek Hyncik
University of West Bohemia, The Czech Republic
Dr. Ahmad Barari
University of Ontario Institute of Technology, Canada
Dr. Chandra Asthana
School of Mechanical & Industrial Engineering, Concordia University, Canada
Dr. Osornio Correa Cuitlahuac
Department of Electrical and Mechanical Engineering, Iberoamerican University, USA
Dr. Yuquan Ding
Department of Mechanical Engineering, Faculty of Engineering, University of Waterloo, Canada
Dr. Müjdat Kaya
Department of Mechanical Engineering, Faculty of Engineering, Baskent University, Turkey
Dr. Razvan Rusovici
Department of Mechanical Aerospace Engineering, Florida Institute of Technology, USA
Dr. Ge Zhang
Department of Building Environment and Equipment Engineering, University of Science and Technology Beijing, China
Dr. Halil Atalay
Faculty of Engineering and Architecture, Bozok University, Turkey
Dr. Zeki Kiral
Department of Mechanical Engineering, Faculty of Engineering, Dokuz Eylul University, Turkey
Dr. Zhigang Chen
School of Mechanical and Mining Engineering, Faculty of Engineering, Architecture and Information Technology, University of Queensland, Australia
Dr. Anze Sitar
Department of Heat and Process Engineering, Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
Dr. Evangelos P. Hinis
Department of Nuclear Engineering, School of Mechanical Engineering, National Technical University of Athens, Greece
Dr. Amiya Chatterjee
Department of Mechanical and Aerospace Engineering, University of California at Los Angeles, USA
Dr. Hamid Sarlak Chivaee
Section of Fluid Mechanics, Institute for Wind Energy, Technical University of Denmark, Denmark
Prof. Seok-Ho Rhi
School of Mechanical Engineering, Chungbuk National University, South Korea
Dr. Andrea Mura
Department of Mechanical and Aerospace Engineering, Polytechnic University of Turin, Italy
Dr. Zhou Shuwen
Vehicle Engineering Institute, School of Mechanical Engineering and Automation, Northeastern University, China
Dr. Vito Tič
Oil Hydraulics Laboratory, Faculty of Mechanical Engineering, University of Maribor, Slovenia
Dr. Roberto Grassi
Department of Mechanical and Aerospace Engineering, Polytechnic University of Turin, Italy
Dr. Kulanda Duysebekova
Department of Information Systems, Faculty of Mathematics and Mechanics, Al-Farabi University, Russia
Prof. Jesus Felez
Railway Technology Research Center, Technical University of Madrid, Spain
Dr. Diego Ramos
Department of Mechanical Engineering, Rovira i Virgili University, Spain
Prof. Cristina Tarín
Institute for System Dynamics, University of Stuttgart, Germany
Prof. Tahir Yavuz
Department of Mechanical Engineering, Faculty of Engineering, Baskent University, Turkey
Dr. Tomaz Kek
Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
Prof. Kye Bock Lee
School of Mechanical Engineering, Chungbuk National University, South Korea
Dr. Sofia Panteliou
Department of Mechanical Engineering and Aeronautics, University of Patras, Greece
Dr. Dorin Catana
Faculty of Materials Science and Engineering, Transilvania University of Brasov, Romania
Dr. Junling (Joyce) Hu
Department of Mechanical Engineering, University of Bridgeport, USA
Prof. Ignacio Pavón García
Department of Mechanical Engineering, Higher Technical School of Industrial Engineers, Polytechnic University of Madrid, Spain
Prof. Jong-Bi Wei
School of Motor Engineering, National Changhua University, Taiwan
Dr. Oluremi Olatunbosun
University of Birmingham, Birmingham, UK
Dr. Avalle Massimiliano
Moscow Aviation Technology Institute, Russian State Technological University, Russia
Dr. Nataša Vujica Herzog
Laboratory for Production and Operations Management, Faculty of Mechanical Engineering, University of Maribor, Slovenia
Prof. Jozef Vizintin
Laboratory of Tribology and Surface, University of Ljubljana, Slovenia
Dr. Michael Sava
National Research Council Canada, Canada
Dr. Akulich Yurii Vladimirovich
Perm State National Research Polytechnic University, Russia
Prof. Nikolay G. Taktarov
Faculty of Physics and Mathematics, Mordovian State Pedagogical Institute, Russia
Dr. Jeremy (Zheng) Li
Department of Mechanical Engineering, School of Engineering, University of Bridgeport, USA
Dr. Nan Wu
Department of Mechanical Engineering, University of Manitoba, Canada
Prof. Stanislav Pehan
Faculty of Mechanical Engineering, University of Maribor, Slovenia
Prof. Faruk Elaldi
Department of Mechanical Engineering, Başkent University, Turkey
Dr. Samo Simončič
Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
Dr. Serge Shil'ko
Belyi Metal-Polymer Research Institute, Belarus National Academy of Sciences, Belarus
Prof. Kamran Behdinan
Faculty of Applied Science & Engineering, University of Toronto, Canada
Prof. Abdel-Hamid I. Mourad
Department of Mechanical Engineering, Faculty of Engineering, United Arab Emirates University, UAE
Dr. Amro AL-Qutub
Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Saudi Arabia
Prof. Hasan Yumak
Department of Engineering and Architecture, Bozok University, Turkey
Dr. Cem Dolu
Department of Mechanical Engineering, Faculty of Mechanical Engineering, Istanbul Technical University, Turkey
Dr. Wael Abdelrahman
Department of Aerospace Engineering, King Fahd University of Petroleum and Minerals, Saudi Arabia
Dr. Ramesh Kolar
Department of Systems Engineering, Naval Postgraduate School, USA
Dr. Ozgur Erol
Institute of Science and Engineering, Başkent University, Turkey
Dr. Leo Gusel
Faculty of Mechanical Engineering, University of Maribor, Slovenia
Prof. Cllr Clive Neal-Sturgess
Department of Mechanical Engineering, University of Birmingham, UK
Prof. Samec Niko
Faculty of Mechanical Engineering, University of Maribor, Slovenia
Dr. Mingming Zhu
School of Mechanical and Chemical Engineering, University of Western Australia, Australia
Prof. Cesim Atas
Department of Mechanical Engineering, Dokuz Eylul University, Turkey
Dr. Mitja Kastrevc
Faculty of Mechanical Engineering, University of Maribor, Slovenia
Dr. Martin Barna
Institute of Fluid Mechanics and Heat Transfer, Johannes Kepler University, Austria
Prof. Tamer Ucar
Department of Mechanical Engineering, Bozok University, Turkey
Dr. Nader Sawalhi
Department of Mechanical Engineering, Prince Mohammad Bin Fahd University (PMU), Saudi Arabia
Dr. Francesca Curà
Department of Mechanical and Aerospace Engineering, Polytechnic University of Turin, Italy
Dr. Cristina Bignardi
Department of Mechanical and Aerospace Engineering, Polytechnic University of Turin, Italy
Dr. Haitham Bahaidarah
Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Saudi Arabia
Dr. Sertan Ozan
Department of Mechanical Engineering, Bozok University, Turkey
Dr. Alberto Lopez-Arraiza
High Technical School of Nautical and Marine Machines, University of the Basque Country, Spain
Dr. Michael Jensen
Department of Mechanical Engineering, Section of Thermal Energy, Technical University of Denmark, Denmark
Prof. Jesa H Kreiner
Department of Mechanical Engineering, California State University, USA
Prof. Filippo Berto
Department of Management and Engineering, University of Padua, Italy
Dr. Fuat KARA
Department of Mechanical and Manufacturing Engineering, Faculty of Technology, Düzce University, Turkey
Dr. Mustafa AYYILDIZ
Department of Mechanical and Manufacturing Engineering, Technology Faculty, Düzce University, Turkey
Assoc. Prof. Maurizio Faccio
School of Engineering, University of Padua, Italy
Dr. RAVI PRATAP SINGH
Department of Industrial & Production Engineering, Dr. B. R. Ambedkar National Institute of Technology (NIT), India
Dr. Muhammad Uzair
NED University of Engineering & Technology, Pakistan
Dr. James M. MUTUA
Department of Mechanical Engineering, Jomo Kenyatta University of Agriculture and Technology, Kenya
Dr. Gianluca Coccia
Faculty of Engineering, Department of Industrial Engineering and Mathematical Sciences, Marche Polytechnic University, Italy
Dr. Slawomir Poskrobko
Department of Heat Engineering, Faculty of Civil and Environmental Engineering, Bialystok University of Technology, Poland
Dr. Chingiz Hajiyev
Faculty of Aeronautics and Astronautics, Istanbul Technical University (ITU), Turkey
Dr. Othman Inayatullah
School of Engineering and Technology, University College of Technology Sarawak, Malaysia
Dr. Manoj Kumar Shukla
Rajiv Gandhi Technical University, India
Dr. Grzegorz Ilewicz
Division of Mechanics, Faculty of Mechanical Engineering and Computer Sciences, University of Bielsko-Biała, Poland
Dr. Piotr Gierlak
Department of Applied Mechanics and Robotics, Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, Poland
Dr. Olga Mazur
Department of Applied Mathematics, National Technical University, Ukraine
Dr. Papic Sejfo
Faculty of Education, University of Sarajevo, Bosnia and Herzegovina
Prof. Predrag Dasic
Department of Information systems, Faculty of Information Technology and Engineering (FITI), University Union "Nikola Tesla", Serbia
Dr. Sead Spuzic
Department of Mechanical and Manufacturing Engineering, School of Engineering, University of South Australia, Australia
Dr. Munish Mehta
School of Mechanical Engineering, Lovely Professional University, India
Dr. Thywill Cephas K. Dzogbewu
Department of Mechanical Engineering, Central University of Technology, South Africa
Dr. Goodwell Muyengwa
Department of Mechanical and Industrial Engineering Technology, University of Johannesburg, South Africa
Dr. Sanderson César Macêdo Barbalho
Faculty of Industrial Engineering, College of Technology, University of Brasília, Brazil
Assoc. Prof. Amit Rakshit
Department of Mechanical Engineering, Kanad Institute of Engineering and Management, India
Dr. Chitaranjan Pany
Structural Engineering Entity, Vikram Sarabhai Space Centre, India
Dr. Saiful Bahri Bin Mohamed
Faculty of Innovative Design and Technology, Universiti Sultan Zainal Abidin, Malaysia
Dr. Sugiono
Research Center for Quality Systems and Testing Technology, Indonesian Institute of Sciences, Indonesia
Dr. Paula Luisa Braga da Silva
Department of Mechanical Engineering, University of Trás-os-Montes and Alto Douro, Portugal
Dr. Eremin Anton
Department of Heat-Power Engineering, Samara State Technical University, Russia
Prof. Carmine Trimarco
Department of Mathematics, University of Pisa, Italy
Assoc. Prof. Tulus Burhanuddin Sitorus
Department of Mechanical Engineering, Faculty of Engineering, University of Sumatera Utara, Indonesia
Assoc. Prof. Mungyeko Bisulandu Baby-Jean Robert
Department of Mechanical Engineering, Kongo University, Democratic Republic of the Congo
Dr. Cokorda Prapti Mahandari
Graduate Programme of Engineering and Technology, Gunadarma University, Indonesia
Dr. Marthen Paloboran
Department of Automotive Engineering, Faculty of Engineering, State University of Makassar, Indonesia
Prof. Jeremiah L. Chukwuneke
Department of Mechanical Engineering, Nnamdi Azikiwe University, Nigeria
Assoc. Prof. José Miguel Martínez Valle
Department of Mechanics, University of Cordoba, Spain