Manufacturing Science and Technology(CEASE PUBLICATION)  

Manufacturing Science and Technology is an international peer-reviewed journal that publishes original and high-quality research papers in all areas of manufacturing. As an important academic exchange platform, scientists and researchers can know the most up-to-date academic trends and seek valuable primary sources for reference.

After consideration, we have decided to cease publication of this journal at the end of 2022. This journal will no longer accept submissions and subscriptions from 2023. All published articles will remain available in Archive at

ISSN: 2333-2735 (Print)

ISSN: 2333-2697 (Online)

Contact Us: or



Volume 6   2019
Vol.6 No.1Vol.6 No.2
Volume 5   2018
Vol.5 No.1Vol.5 No.2
Volume 4   2017
Vol.4 No.1Vol.4 No.2Vol.4 No.3
Volume 3   2015
Vol.3 No.1Vol.3 No.2Vol.3 No.3Vol.3 No.4Vol.3 No.5
Volume 2   2014
Vol.2 No.1Vol.2 No.2Vol.2 No.3Vol.2 No.4Vol.2 No.5Vol.2 No.6
Volume 1   2013
Vol.1 No.1Vol.1 No.2

Vol 3(Dec, 2015) No 5

Casting of Clad Strip by a Vertical Type Twin Roll Caster

Toshio Haga, Hisaki Watari

[Abstract] [Full Text] [Full Article - PDF] pp. 197 - 203

DOI: 10.13189/mst.2015.030501

Auxetic Nanocomposite based on Styrene Butadiene Rubber (SBR) Foam with Varying Nano-carbon Loading

M. Tanweer Khan, Muhammad Shahid, M. Arshad Bashir, Qurat Ulain

[Abstract] [Full Text] [Full Article - PDF] pp. 204 - 209

DOI: 10.13189/mst.2015.030502

Microstructural Development of a Friction Stir Welded Ti-6Al-4V Sheet

M.W.B. Santos, A. Farias, M. Stipkovic Filho, G.F. Batalha

[Abstract] [Full Text] [Full Article - PDF] pp. 210 - 217

DOI: 10.13189/mst.2015.030503

Mechanical and Metallurgical Properties of Heavy Wall Grade X80 High Strain Line Pipe Steel

Weihua Sun, Ping Du, Zhigang Liu, Chaohai Guo, Runsheng Zhang, Lei Zhang, Jinghui Ren, Liwei Liu

[Abstract] [Full Text] [Full Article - PDF] pp. 218 - 223

DOI: 10.13189/mst.2015.030504

Microstructure and Tribological Properties of PTA Deposited Stellite 12 Coating on Steel Substrate

Amir Motallebzadeh, Erdem Atar, Huseyin Cimenoglu

[Abstract] [Full Text] [Full Article - PDF] pp. 224 - 228

DOI: 10.13189/mst.2015.030505

The State of the Atomic Lattice of Structure Materials: Pre NDE Indication Assessments

F. M. Al-Abbas, F. A. Al-Hindas, D. L. Olson, B. Mishra

[Abstract] [Full Text] [Full Article - PDF] pp. 229 - 235

DOI: 10.13189/mst.2015.030506

Effects of Blending Sequence on Morphology and Mechanical Properties of Polypropylene/Ethylene-octene Copolymer/Clay Nanocomposites

Sedigheh Bagheri Kazemabad, Alireza Khavandi, Daniel Fox, Yanhui Chen, Hongzhou Zhang, Biqiong Chen

[Abstract] [Full Text] [Full Article - PDF] pp. 236 - 239

DOI: 10.13189/mst.2015.030507

Optimization and Prediction Approaches for Flexible Routing in Dynamic Environment FMS

Jaber Abu Qudeiri, Usama Umer, Fayiz Abu Khadra, H.M.A. Hussein

[Abstract] [Full Text] [Full Article - PDF] pp. 240 - 248

DOI: 10.13189/mst.2015.030508

Different Gate Insulators for Organic Field Effect Transistors

O. Boughias, M.S. Belkaid, T. Trigaud, R.Zirmi

[Abstract] [Full Text] [Full Article - PDF] pp. 249 - 252

DOI: 10.13189/mst.2015.030509

Some Transport Properties of Alumix-431 Materials by Prepared P/M Method

Abdul Kadir Eksi, Ayse Nur Acar, Ahmet Ekicibil

[Abstract] [Full Text] [Full Article - PDF] pp. 253 - 258

DOI: 10.13189/mst.2015.030510

Prediction of Hardness for Partially Quenched Boron Steel Using Quench Factor Analysis

J. Y. Choi, J. H. Kim, D. H. Ko, P. K. Seo, D. C. Ko, B. M. Kim

[Abstract] [Full Text] [Full Article - PDF] pp. 259 - 265

DOI: 10.13189/mst.2015.030511

Influence of Ball Screw Equipped with Counter-balance Mechanism on Machine Tool Vibration in Step-drilling Process

Ryosuke Shibata, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, Tatsuya Yamashita

[Abstract] [Full Text] [Full Article - PDF] pp. 266 - 273

DOI: 10.13189/mst.2015.030512

Deep Levels in InGaN/GaN-LEDs

Nazir A. Naz, M. Imran, Nabeela Akbar, Akbar Ali

[Abstract] [Full Text] [Full Article - PDF] pp. 274 - 277

DOI: 10.13189/mst.2015.030513

Design and Analysis of Lightweight Automotive Component for Turbocharger Units

Mehmet Cagri Tuzemen, Mehmet Agaoglu, Mehmet Karakaya, Elmas Salamci, Gokhan Kucukturk

[Abstract] [Full Text] [Full Article - PDF] pp. 278 - 285

DOI: 10.13189/mst.2015.030514

Electrochemical Corrosion Behavior of Spirally-welded API X-70 Line-pipe Steel in Acidic and Salt Media

Sohail M. A. Khan, Asiful H. Seikh, Muneer Baig, Magdy M. El Rayes

[Abstract] [Full Text] [Full Article - PDF] pp. 286 - 293

DOI: 10.13189/mst.2015.030515

A New FEM Approach for the Determination of Fracture Parameters in Polymethyl-metacrylate PMMA

Khelil F., Belhouari M., Aour B., Benhamena A., Benaoum F.

[Abstract] [Full Text] [Full Article - PDF] pp. 294 - 299

DOI: 10.13189/mst.2015.030516

Analysis of Surface Roughness and Material Removal Rate for Metal Matrix Composite AlSi/10%ALN in EDM Die Sinking Operation

S. Sulaiman, M.S. Sany, M.S. Said

[Abstract] [Full Text] [Full Article - PDF] pp. 300 - 307

DOI: 10.13189/mst.2015.030517

Study on Influence of Effective Parameters on Wear Behavior of Wheel and Rails through ADAMS-RAIL Software

Majid Elyasi , Milad Hadinezhad , Mohammad Rajabi , Majid Abbasi

[Abstract] [Full Text] [Full Article - PDF] pp. 308 - 315

DOI: 10.13189/mst.2015.030518