HRPUB | Manufacturing Science and Technology(CEASE PUBLICATION)

Journals Information

Special Issues Information

Manufacturing Science and Technology(CEASE PUBLICATION)

Manufacturing Science and Technology is an international peer-reviewed journal that publishes original and high-quality research papers in all areas of manufacturing. As an important academic exchange platform, scientists and researchers can know the most up-to-date academic trends and seek valuable primary sources for reference.

After consideration, we have decided to cease publication of this journal at the end of 2022. This journal will no longer accept submissions and subscriptions from 2023. All published articles will remain available in Archive at https://www.hrpub.org/journals/jour_archive.php?id=54

ISSN: 2333-2735 (Print)

ISSN: 2333-2697 (Online)

Website: https://www.hrpub.org/journals/jour_info.php?id=54

Vol 3(Dec, 2015) No 4

Study the Effect of Different Liquid Media on the Synthesis of Alumina (Al₂O₃) Nanoparticle by Pulsed Laser Ablation Technique

Suha I. Al-nassar, Adel. K. M., Zaineb F. Mahdi

[Abstract] [Full Text] [Full Article - PDF] pp. 77 - 81

DOI: 10.13189/mst.2015.030401

Modeling of Shape Memory Alloys for Medical Design in Robotics

R. Leticia Corral-Bustamante, Marco Antonio Flores Trevizo, Jose Nino Hernandez-Magdaleno

[Abstract] [Full Text] [Full Article - PDF] pp. 82 - 97

DOI: 10.13189/mst.2015.030402

Multilayer Graphene (MLG)-Reinforced Al₂O₃ Nanocomposites Fabricated by High-frequency Induction-heat Sintering Technology

I. Ahmad

[Abstract] [Full Text] [Full Article - PDF] pp. 98 - 105

DOI: 10.13189/mst.2015.030403

Tribological Performance of Medical Grade UHMWPE Polymer at Egg Albumen Lubricated Condition

H. Unal, A. Mimaroglu

[Abstract] [Full Text] [Full Article - PDF] pp. 106 - 110

DOI: 10.13189/mst.2015.030404

Friction and Wear of GUR 1020 Medical Grade Uhmwpe Polymer at Dry Environmental Condition

A Mimaroglu, H Unal, M Sumer, A Ozel

[Abstract] [Full Text] [Full Article - PDF] pp. 111 - 113

DOI: 10.13189/mst.2015.030405

Improvement of the Optical Properties of Sandblasted Glass by Depositing Acrylic Coatings

Mostafa Kolli, Hind Laouamri, Noureddine Bouaouadja

[Abstract] [Full Text] [Full Article - PDF] pp. 114 - 118

DOI: 10.13189/mst.2015.030406

Experimental Comparison between Two Types of Hybrid Composite Materials in Compression Test

Suhad D. Salman, W.S. Wan Hassim, Z. Leman

[Abstract] [Full Text] [Full Article - PDF] pp. 119 - 123

DOI: 10.13189/mst.2015.030407

Hardness Inhomogeneity and Microstructure Stability in Aluminum-copper Alloys Processed by Equal Channel Angular Pressing

Mahmoud S Soliman, Ehab A El-Danaf, Mohammad J Al-Suwinea

[Abstract] [Full Text] [Full Article - PDF] pp. 124 - 127

DOI: 10.13189/mst.2015.030408

Power Control for Stable Achievement of Local Hardening of Steel Using Rapid Resistance Heating

Seijiro Maki, Yuuki Makida, Eitoku Nakanishi

[Abstract] [Full Text] [Full Article - PDF] pp. 128 - 133

DOI: 10.13189/mst.2015.030409

Study of the Effects of Micro- and Nanolayered Structures on Mechanical Response of Microalloyed Steels

Janusz Majta, Krzysztof Muszka, Lukasz Madej, Marcin Kwiecien, Paulina Graca

[Abstract] [Full Text] [Full Article - PDF] pp. 134 - 140

DOI: 10.13189/mst.2015.030410

The Variation of Magnetic Properties of Nickel Ferrite by Annealing

H. Moradmard, S. Farjami Shayesteh

[Abstract] [Full Text] [Full Article - PDF] pp. 141 - 145

DOI: 10.13189/mst.2015.030411

Study of the Effects of Slip Distance and Surface Roughness on Wear Rate

Milad Hadinezhad, Majid Elyasi, Mohammad Rajabi, Majid Abbasi

[Abstract] [Full Text] [Full Article - PDF] pp. 146 - 154

DOI: 10.13189/mst.2015.030412

Investigation of Micro-structure and Creep Life Analysis of Centrifugally Cast Fe–Cr–Ni Alloy Reformer Tubes

Amitava Ghatak, P.S. Robi

[Abstract] [Full Text] [Full Article - PDF] pp. 155 - 159

DOI: 10.13189/mst.2015.030413

An Investigation into High Temperature Tensile Behavior of Hot-extruded Al–15wt%Mg₂Si Composite with Cu-P Addition

F. Fatemi-Jahromi, M. Emamy

[Abstract] [Full Text] [Full Article - PDF] pp. 160 - 169

DOI: 10.13189/mst.2015.030414

Study on Preparation of Flexible Semiconductor Electrode for Dye-sensitized Solar Cells by EPD

W.T. Chiang, P.T. Lee, R.Q. Hsu

[Abstract] [Full Text] [Full Article - PDF] pp. 170 - 176

DOI: 10.13189/mst.2015.030415

Effect of Electrolyte Concentration on the Surface Properties of Nanoporous TiO₂ Layers Formed on Micro-roughened Titanium

Tuncay Dikici, Selim Demirci, Mustafa Toparli

[Abstract] [Full Text] [Full Article - PDF] pp. 177 - 181

DOI: 10.13189/mst.2015.030416

A Study on Wear Behaviour of Laser Direct Metal Deposited High Strength H13 Tool Steel

Syed H Riza, S.H. Masood, Cuie Wen

[Abstract] [Full Text] [Full Article - PDF] pp. 182 - 188

DOI: 10.13189/mst.2015.030417

Effect of Heat Treatment on the Microstructure, Hardness and Wear Properties of Al−15Mg₂Si−3Cu with Different Contents of Zn

F. Samadi, M. Emamy, A. Honarbakhsh Raouf, A. Akrami

[Abstract] [Full Text] [Full Article - PDF] pp. 189 - 195

DOI: 10.13189/mst.2015.030418

Volume 6 2019
Vol.6 No.1	Vol.6 No.2
Volume 5 2018
Vol.5 No.1	Vol.5 No.2
Volume 4 2017
Vol.4 No.1	Vol.4 No.2	Vol.4 No.3
Volume 3 2015
Vol.3 No.1	Vol.3 No.2	Vol.3 No.3	Vol.3 No.4	Vol.3 No.5
Volume 2 2014
Vol.2 No.1	Vol.2 No.2	Vol.2 No.3	Vol.2 No.4	Vol.2 No.5	Vol.2 No.6
Volume 1 2013
Vol.1 No.1	Vol.1 No.2