Universal Journal of Mechanical Engineering Vol. 8(4), pp. 227 - 236
DOI: 10.13189/ujme.2020.080408
Reprint (PDF) (440Kb)

Optimization of Composition of Selected Biomass for Briquette Production

Chukwuneke J. L. ^1,*, Umeji A. C. ¹, Sinebe J. E. ², Fakiyesi O. B. ^3
1 Department of Mechanical Engineering, Nnamdi Azikiwe University, Awka, Nigeria
² Department of Mechanical Engineering, Delta State University, Abraka, Nigeria
³ Department of Industrial/Production Engineering, Nnamdi Azikiwe University, Awka, Nigeria

ABSTRACT

In this study, investigations were carried out on the energy evaluation, performance analysis and optimization of briquettes produced from biomass wastes (rice-husk and sawdust) and their composites using starch and clay as binders. The proximate compositions of the briquettes were determined following ASTM analytical methods. The moisture content of rice husk and sawdust before briquettes was 20wt.% and 15wt.% respectively. The briquettes produced from bio-waste material of homogeneous particle sizes of 0.5mm and two binders of a percentage of 90:10 which were sun-dried, prepared and moisturized, were reduced to 5wt.% and compressed for the production of briquettes. The energy evaluation of the briquettes was performed using an oxygen bomb calorimeter and the performance test of the briquettes was carried out. Design Expert Central Composite Design Tool was used in the design and Response surface methodology was used to optimize the energy values of rice-husk/sawdust composite briquettes with clay and starch as binders, after which composite briquette made of mahogany sawdust/rice-husk were produced using the optimum condition values of 15% binder starch, 28% rice-husk and 9Mpa compaction pressure. The results showed that composite briquettes of mahogany sawdust and rice-husk produced with starch had a maximum energy value of 5.69kcal/g, while those made with clay had a minimum energy value of 3.35kcal/g. However, the experimental result was less than the predicted optimum value of 2%. This shows that composite briquette made from mahogany sawdust/rice-husk has better energy efficiency than other briquettes considered and it has been observed that starch is a better bonding material than clay. Briquetting technology has great potential to transform waste biomass in affordable, effective and environmentally safe, high-quality solid fuel for households and industry use.

KEYWORDS
Energy, Biomass, Binders, Briquettes, Calorific Value, Composite, Optimization

Cite This Paper in IEEE or APA Citation Styles
(a). IEEE Format:
[1] Chukwuneke J. L. , Umeji A. C. , Sinebe J. E. , Fakiyesi O. B. , "Optimization of Composition of Selected Biomass for Briquette Production," Universal Journal of Mechanical Engineering, Vol. 8, No. 4, pp. 227 - 236, 2020. DOI: 10.13189/ujme.2020.080408.

(b). APA Format:
Chukwuneke J. L. , Umeji A. C. , Sinebe J. E. , Fakiyesi O. B. (2020). Optimization of Composition of Selected Biomass for Briquette Production. Universal Journal of Mechanical Engineering, 8(4), 227 - 236. DOI: 10.13189/ujme.2020.080408.