Civil Engineering and Architecture Vol. 8(1), pp. 21 - 25
DOI: 10.13189/cea.2020.080103
Reprint (PDF) (411Kb)

Bending Behavior on Beam with Supporting Part

Zefry Darmawan ¹, Dwi Hadi S ¹, Debrina Puspita A ¹, Shigeyuki Haruyama ², Oke Oktavianty ^1,*
1 Department of Industrial Engineering, Brawijaya University, Indonesia
² Graduate School of Management of Technology, Yamaguchi University, Japan

ABSTRACT

Equipment used to help road users during road maintenance activities is called a flexible bridge. It helps maintain the accessible area of the road when repairs occur. Collapse has occurred sometimes at frame when bending load exceeds the yield strength. In addition to increase the ability of the structure and avoid buckling added a link as damper. Parameters of the absorber are stiffness rate, and elongation of link. A simple square tube beam model supported by a link was created to investigate the bending behavior using finite element analysis. The analysis result showed that beam supported by a link able to reduce buckling moreover provides longer curvature than beam without a link.

KEYWORDS
Flexible Bridge, Finite Element

Cite This Paper in IEEE or APA Citation Styles
(a). IEEE Format:
[1] Zefry Darmawan , Dwi Hadi S , Debrina Puspita A , Shigeyuki Haruyama , Oke Oktavianty , "Bending Behavior on Beam with Supporting Part," Civil Engineering and Architecture, Vol. 8, No. 1, pp. 21 - 25, 2020. DOI: 10.13189/cea.2020.080103.

(b). APA Format:
Zefry Darmawan , Dwi Hadi S , Debrina Puspita A , Shigeyuki Haruyama , Oke Oktavianty (2020). Bending Behavior on Beam with Supporting Part. Civil Engineering and Architecture, 8(1), 21 - 25. DOI: 10.13189/cea.2020.080103.