Journals Information
Universal Journal of Electrical and Electronic Engineering Vol. 6(5A), pp. 86 - 93
DOI: 10.13189/ujeee.2019.061510
Reprint (PDF) (465Kb)
132kV Oil Impregnated Paper Bushing Transformer - Design by CAD, Analysed by FEM
N. Abd. Rahman 1,*, M. Isa 1, M. N. K. H. Rohani 1, H A. Hamid 1, Mohd Mustafa Al Bakri Abdullah 2
1 Center for Electrical System Engineering Studies, Universiti Malaysia Perlis, Malaysia
2 Centre of Excellence Geopolymer and Green Technology, University Malaysia Perlis, Malaysia
ABSTRACT
The Electric Field and Voltage Distribution (EFVD) are an important parameter for assessing high voltage bushing transformer performance. However, conducting laboratories experiment is dangerous, difficult and expensive due to several aspects. Therefore, Finite Element Method (FEM) software is the best option used as a tool for the assessment of bushing transformer's performance in terms of EFVD. But, before an assessment of analysis could be carried out, an accurate model of bushing transformer must first to be designed. In this research, Computer Aided Design (CAD) software has been employed to design the 145kV bushing transformer based on actual dimension. Upon completion, the design has been exported to FEM software for further analysis. In FEM software, measurement and analysis of electric field and voltage distribution (EFVD) have been carried out. The measurements are performed at various locations of bushing transformer such as of the porcelain surface (both air and oil side), along with aluminum foils, and at oil-impregnated paper (OIP). The results obtained have been compared with other researchers and it is found very satisfactory.
KEYWORDS
Bushing Transformer, Oil Impregnated Paper, FEM, CADCAM, Electric Field, Voltage Distribution
Cite This Paper in IEEE or APA Citation Styles
(a). IEEE Format:
[1] N. Abd. Rahman , M. Isa , M. N. K. H. Rohani , H A. Hamid , Mohd Mustafa Al Bakri Abdullah , "132kV Oil Impregnated Paper Bushing Transformer - Design by CAD, Analysed by FEM," Universal Journal of Electrical and Electronic Engineering, Vol. 6, No. 5A, pp. 86 - 93, 2019. DOI: 10.13189/ujeee.2019.061510.
(b). APA Format:
N. Abd. Rahman , M. Isa , M. N. K. H. Rohani , H A. Hamid , Mohd Mustafa Al Bakri Abdullah (2019). 132kV Oil Impregnated Paper Bushing Transformer - Design by CAD, Analysed by FEM. Universal Journal of Electrical and Electronic Engineering, 6(5A), 86 - 93. DOI: 10.13189/ujeee.2019.061510.