Universal Journal of Mechanical Engineering Vol. 7(6), pp. 336 - 347
DOI: 10.13189/ujme.2019.070605
Reprint (PDF) (877Kb)

Impact of Notch Geometry on the Pressure Bearing Capacity of AISI 316L Austenitic Stainless Steel under Fatigue Loading

J. Jagadesh Kumar ^1,*, G. Diwakar ¹, V. V. Satyanarayana ^2
1 Department of Mechanical Engineering, Koneru Lakshmaiah Education Foundation (Deemed to be University), India
² Department of Mechanical Engineering, Vidya Jyothi Institute of Technology, India

ABSTRACT

In the current research, pressure bearing capacity of AISI 316L austenitic stainless steel is evaluated under fatigue loading through finite element method (ANSYS 18.1) for a specimen with no notch on its surface. Thereafter, the pressure bearing capacity of the same specimen is evaluated with rectangular and V-notches at the center. The notch geometry is changed in terms of its width, depth and the notch central angle (perimeter length) for each of the rectangular and V-notched cases. Fifteen types of rectangular notch and V-notch geometries are undertaken for the research as required by Box-Behnken model of Response Surface Methodology (RSM) analysis. The primary objective of the research is to evaluate the impact of notch geometry on the pressure bearing capacity under fatigue loading conditions. It is observed that fatigue life degraded more with V-notched specimens when compared to rectangular notched ones. Regression equations are developed and surface plots are generated for both rectangular and V-notch cases for the pressure bearing capacity which is dependent on width, depth and notch central angle.

KEYWORDS
Fatigue Loading, Box-Behnken Model, Response Surface Methodology (RSM), Analysis of Variance (ANOVA)

Cite This Paper in IEEE or APA Citation Styles
(a). IEEE Format:
[1] J. Jagadesh Kumar , G. Diwakar , V. V. Satyanarayana , "Impact of Notch Geometry on the Pressure Bearing Capacity of AISI 316L Austenitic Stainless Steel under Fatigue Loading," Universal Journal of Mechanical Engineering, Vol. 7, No. 6, pp. 336 - 347, 2019. DOI: 10.13189/ujme.2019.070605.

(b). APA Format:
J. Jagadesh Kumar , G. Diwakar , V. V. Satyanarayana (2019). Impact of Notch Geometry on the Pressure Bearing Capacity of AISI 316L Austenitic Stainless Steel under Fatigue Loading. Universal Journal of Mechanical Engineering, 7(6), 336 - 347. DOI: 10.13189/ujme.2019.070605.