Universal Journal of Mechanical Engineering Vol. 3(2), pp. 34 - 46
DOI: 10.13189/ujme.2015.030202
Reprint (PDF) (5534Kb)


Experimental and Theoretical Study of Hardness and Grain Size Variation in Cold Upset for Pure Copper Cylinder


Abdul AlKareem F. Hassan *, Safa A. Saleh , Zainab H. Jibar
Materials Engineering Dept.-College of Engineering -University of Basra, Iraq

ABSTRACT

In this work, the influence of varied deformation percentages on the hardness and grain size, effective strain variation during simple upsetting is studied. Also, hardness variation in a typical cold upset forging process is predicted by relating hardness and effective strain evolution in a simple upsetting operation empirically. Five different deformation percentages, (13%, 17%, 32.4%, 41%, 50%), are considered for experimentation. Ring compression tests were conducted to determine the friction factor 'm'. The upset-forging tests were conducted at room temperate and for different deformation percentage on the pure copper cylindrical specimens of 30 mm diameter with aspect ratio (ho/do) of 1.0. The distribution of hardness in the cold upset specimen was measured using the Brinell Hardness Tester. Also, this work discussing metallographic study of the upset specimens. The micrograph of samples is processed with the 'Adobe Photoshop CS2' program and then applying the "Image J" program for estimating the average grain size. The upsetting operation was simulated using a commercial finite element code, ANSYS ver11.0. The results show that the finite element procedure is effective procedure to simulating cold upsetting process with maximum error (7.7%).

KEYWORDS
Cold Upset, Fe of Copper Cylinder under Cold Upset, Hardness and Grain Size Variation

Cite This Paper in IEEE or APA Citation Styles
(a). IEEE Format:
[1] Abdul AlKareem F. Hassan , Safa A. Saleh , Zainab H. Jibar , "Experimental and Theoretical Study of Hardness and Grain Size Variation in Cold Upset for Pure Copper Cylinder," Universal Journal of Mechanical Engineering, Vol. 3, No. 2, pp. 34 - 46, 2015. DOI: 10.13189/ujme.2015.030202.

(b). APA Format:
Abdul AlKareem F. Hassan , Safa A. Saleh , Zainab H. Jibar (2015). Experimental and Theoretical Study of Hardness and Grain Size Variation in Cold Upset for Pure Copper Cylinder. Universal Journal of Mechanical Engineering, 3(2), 34 - 46. DOI: 10.13189/ujme.2015.030202.